A2Z AD-ONE SPEED - single speed adapter

I have a question, will this fit this type of freehub body Shimano FH-MT400-B, 32 holes, CL, thru axle 12×148 mm

Hello, 
thank you for your question. The set should fit 8/9-speed Shimano freehub bodies. 

Best regards 
Ondřej Kinkor

Koloshop.cz

Customer

30.07.2024

Hello, I’d like to ask whether the "A2Z AD-ONE SPEED - single speed adapter" will fit instead of the original cassette "Shimano MF-TZ 21-7, 14-28 T"? Thank you.

Hello,

unfortunately this adapter is not suitable, because you don’t have a freehub with a cassette, but a screw-on freewheel. After removing the freewheel, I recommend measuring the thread diameter, but it should be 34.7 mm, and then this could be used:

https://www.koloshop24.com/freewheel-16-teeth-1-2-x-1-8-right-thread-1-37-34-7-mm/109413

Ondřej Technical Support

Hello, I have a question about the A2Z ad one speed - singlespeed adapter. I would need this adapter, but for a Campagnolo freehub body. Would that be possible? Thank you

Hello,

I'm sorry, but we can't source this type of adapter for Campagnolo. Of course, you can buy this set and additionally a suitable Campagnolo sprocket separately:

Campagnolo sprocket 16 teeth for 10sp cassette

Best regards and have a nice day

Vít Technical Support

Hello, I'm looking for an A2Z AD-ONE singlespeed adapter, but for a Campagnolo freehub. Please let me know if it can be ordered. Thanks, Lukas Gilanyi

Hello,

I'm sorry, but we are not able to source this type of adapter for Campagnolo. Of course, you can buy this set and then separately a suitable Campagnolo sprocket:

Campagnolo sprocket 16 teeth for 10sp cassette

Ondřej Technical Support

Hi Is it compatible with a Shimano Sora 9s hub?

Hello,
No, this is intended only for singlespeed.

Koloshop.cz

Will this single speed adapter fit an enduro hub JOYTECH JY-754DSE for 3 to 7-speed screw-on freewheel cogs with a fixed 3/8\" nutted axle?

Hello,
this adapter cannot be used. For your hub, Force screw-on freewheel 20 teeth is intended.

Koloshop.cz

Hello,
this adapter cannot be used. For your hub, Force screw-on freewheel 20 teeth is intended.

Koloshop.cz

Does the adapter fit a hub from CTM Raptor 2.0?

Hello,
yes, the adapter should fit your hub.

Kind regards
Kinkor

Koloshop.cz

Will this set work on an 11sp freehub that had a Shimano Slx cassette on it?

Hello,

yes, it will work.

Ondřej Technical Support

Hello, which chain is needed for these sprockets, narrow 3/32\" or wide 1/8\"? Thanks

Hello,

the manufacturer does not state any limitation for chain use. Using 3/32" should not be a problem.

Ondřej Technical Support

Am I understanding this correctly? If I remove the derailleur and the cassette with 8 sprockets and put this adapter instead, will it work? Without the pedals turning at the same time as the wheel? For example, when I ride downhill and don’t pedal, the pedals won’t turn according to the rear wheel, right?

Hello,

yes, this will create a singlespeed and you will continue to use the advantages of the hub’s freehub. Spacers are used to fine-tune the position of the single sprocket so the chain runs straight between the chainring and the sprocket.

Ondřej Technical Support