Mavic E-Crossride 1 29" Boost Disc CL rear built wheel freehub Shimano HG

Description

The Mavic E-Crossride 1 29 rear wheel will give you peace of mind when your e-bike digs in on a climb and the trail gets rough. It holds its line, shrugs off impacts, and still spins smoothly.

Main benefits

The design is developed for e-bikes, so it handles higher torque and greater weight without unnecessary compromises. It relies on a well-thought-out lacing pattern and a more durable rim construction.

The hub with ID360 Instant Drive 360 technology engages quickly while remaining easy to maintain. The pair of ratchet rings is designed for reliable power transfer off-road.

The rim profile supports tubeless riding thanks to UST Tubeless Ready, which helps with traction and comfort over roots and rocks. At the same time, you reduce the risk of punctures at lower pressures.

PFP Pinch Flat Protection technology increases resistance to pinch flats and tyre damage on hard landings. This is especially useful with a heavier bike and faster riding.

Technical specifications

29-inch rim diameter according to ETRTO 622x30TSS with a hookless and asymmetric profile.

30 mm internal rim width and 21 mm rim height.

Rear axle 12x148 mm Boost and disc mount for 6 bolts or CenterLock.

Rear wheel weight 1,185 g and maximum load 150 kg including the bike.

Conclusion

Mavic E-Crossride 1 29 Boost Disc CL is a rear wheel for e-MTBs, trail, and enduro according to ASTM category 4. Thanks to sealed bearings with automatic QRM adjustment, it spins smoothly and without play.

Steel spokes with three-cross lacing and 32 holes maintain stiffness even under lateral loads in corners. The Shimano HG freehub expands compatibility with common MTB cassettes.

Key features

• Shimano HG freehub for MTB cassettes
• Hub with Instant Drive 360 ratchet
• UST Tubeless Ready, tape installed
• 32-hole lacing, three-cross
• Load capacity up to 150 kg including the bike

EAN: 3701380905141