Pinguin Taifun 2 Tent 2 persons

Description

Double-walled tent. The inner tent has a rectangular floor plan with two entrances on its longer sides. The outer tent is an octagon with two entrances, each featuring a vestibule that's suitable for storing luggage.

The tent can be set up without the inner tent (bedroom), reducing its weight and essentially creating a single-wall tent without a groundsheet.

Technical Specifications

• Weight: 4.3 kg
• Weight without the inner tent (bedroom): 3.2 kg
• Packed dimensions: ⌀22 x 45 cm
• Flysheet water column: 4,000 mm
• Flysheet material: Polyester with taped seams
• Groundsheet material: Layered Rip-Stop polyethylene
• Frame material: Fiberglass (9.5 mm pole diameter)
• Number of poles/points of intersection: 4/5
• Bedroom width: 150 cm
• Bedroom length: 220 cm
• Bedroom height: 115 cm

Ventilation

• It's located at the peak of the dome flysheet.
• Ventilation covers are shaped to prevent them from folding in the wind. If necessary, they can be closed with Velcro, preventing leakage even during heavy rain and high wind.

Tent Design

• It's based on a design principle where the pole construction threaded in sleeves is external to the flysheet.
• The flysheet and inner tent (which is suspended under the flysheet) are erected simultaneously after threading poles through sleeves. The advantage of this method is that the inner tent can be detached from the flysheet, allowing the flysheet to stand alone. This way, you create a single-wall tent without a groundsheet.

Tent Setup

• Thread the poles through the sleeves outside the flysheet, and insert the pole ends into brass eyelets at the lower edge of the flysheet. Then clip the buckles on the straps and inside the tent near the ground to set up the flysheet. Attach the inner tent to the loops on the inside of the flysheet. Anchor the erected tent with pegs and ropes, and tighten with plastic buckles.

EAN: 8592638134247