![Netherlands [EUR]](/images/front/locales/NLD.svg)
Headsets
Headsets fall into several categories (see below). There are external cup threadless headsets, which must be pressed into the frame. Another commonly used type is the zero-stack semi-integrated threadless headset, which also must be pressed into the frame, but unlike external cups, the cups sit flush with the headtube. Drop-in headsets have the bearing seats molded or machined directly into the frame where the cartridge bearings sit. The oldest and now uncommon type is the threaded headset.
Select Filters
XLC AP-C01 expander for carbon forks 22-23 mm
Special hedgehog for carbon forks, including a plug and screw, with an inner steerer tube diameter of 22-23 mm.
Buy
Rock Shox Headset Spacer Set carbon spacer set Gloss Black Logo
UD Carbon material, Gloss Black Logo finish, thicknesses 2x 2.5 mm, 1x 5 mm, 1x 10 mm, 1x 20 mm.
Buy
Cane Creek Forty ZS44/30 Bottom lower part of the headset
Lower part of the headset, for a 44 mm head tube, for a 28.6 mm steerer tube, weight 65 g.
Buy
Cane Creek Ten ZS44 Short headset
Headset for forks with a 1 1/8" steerer tube, for frames with a 44 mm head tube.
Buy
ControlTech carbon column expander 1 1/8"
A star nut designed for a 1 1/8" fork steerer tube with a length of 32 mm, weighing 30 g, made of aluminum.
Buy
Cane Creek Forty ZS56 Short TOP upper headset part
Upper part of the headset, type ZS56, 8 mm height, including star nut and top cap.
Buy
Cane Creek Forty 52 mm bearing 45° x 45°
Cane Creek bearing for integrated headsets of the "Italian" type.
Buy
Mortop S1 set of 5mm stem spacers - 5 pcs red
Set of 5 spacers, for a 1 1/8" steerer tube, height 5 mm, material alu, finish red anodized.
Buy
Cane Creek Slamset ZS44/ZS56 headset black
The Cane Creek Slamset ZS44/ZS56 headset is designed for frames with a head tube opening diameter of 44mm at the top and 56mm at the bottom. Typically intended…
Buy
Cane Creek Slamset ZS44/EC44 headset black
The Cane Creek Slamset ZS44/EC44 headset is designed for frames with a head tube diameter of 44 mm at both the top and bottom. It is standardly intended for a…
Buy
Shaman Racing headset cap 1.5"
Headset cap for 1.5" steerer tubes made from Alu 7005 material.
Buy
Race Face Headset Spacer Kit spacer set
Set of aluminum stem spacers, sizes 2, 5, 10, 15 mm, cap, color black
Buy
Cannondale upper seal for headset of carbon frames (QSCSEAL)
Cannondale upper seal for headset carbon frames (QSCSEAL)
Buy
Cane Creek Forty IS42 Tall Drop In headset
Top and bottom part of a Cane Creek integrated headset for a 1 1/8 fork, for frames with an internal head tube diameter of 41.8 mm.
Buy
Cane Creek Forty ZS55/30 (1 1/8") lower headset assembly
Lower headset cup for frames with a tapered head tube and forks with a 1 1/8" steerer.
Buy
Cane Creek 110 EC49/40 1.5" lower headset部分
Cane Creek 110 lower headset assembly, for 1.5" steerer tubes.
Buy
Sting ST-SH53A semi-integrated headset 1 1/8" - 1.5"
Semi-integrated headset 1 1/8" - 1.5"
Buy
Cane Creek 110 41mm 1 1/8" bearing
Cane Creek 1 1/8" headset bearing with a diameter of 41mm. The highest quality stainless steel series 110!
Buy
Cane Creek Angleset ZS44/ZS56 KIT headset
Revolutionary headset that allows you to change the fork steerer angle by 0.5°, 1°, or 1.5°.
Buy
Cane Creek bottom cup Angleset EC56 -1.5° Offset / +1° Offset
The Cane Creek Angleset EC56 lower headset cup. Allows for an angle adjustment of -1.5 degrees / +1 degree.
Buy
Cane Creek Angleset ZS44/EC56 1.0° headset
Revolutionary headset that allows you to change the fork steerer angle by 1°. Recommended for adjusting the geometry of bikes with a single crown suspension…
Buy
We have 475 products
Added to Cart
Continue Shopping
Via Facebook
Via Google
