Headsets
Headsets fall into several categories (see below). There are external cup threadless headsets, which must be pressed into the frame. Another commonly used type is the zero-stack semi-integrated threadless headset, which also must be pressed into the frame, but unlike external cups, the cups sit flush with the headtube. Drop-in headsets have the bearing seats molded or machined directly into the frame where the cartridge bearings sit. The oldest and now uncommon type is the threaded headset.
Cane Creek FORTY ZS49 1.5-1 1/8 headset
The Forty ZS49 headset reduces a 1.5" head tube (inner diameter of 49.61mm) for use with a fork with a 1 1/8" steerer. Suitable for downhill bikes and dual…
BP star nut for headset 1-1/8" black
Headset compression ring for adjusting bearing preload and securing the stem, for a 1–1/8" fork steerer tube, black finish.
Rie:sel Design Stem:cap headset cap Alpine
Carbon headset cap, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset top cap Japan
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset cap Gaming
Headset cap, material carbon, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset cover Höhenlinien
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset cap Monster Blue
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel headset cap stem:cap slang
Original headset cap, carbon cap and aluminum bolt, for 1 1/8" headset, maximum tightening torque 5 Nm, weight only 6 g.
FSA No.42 1 1/8-1/5" Drop In headset
Integrated headset, steerer tube 1 1/8 to 1/5, outer diameter of the top bearing 42 mm, outer diameter of the bottom bearing 52 mm, bearings 45/36°.
Rie:sel Design stem:cap headset cap Stickerbomb Eyecatcher Ultra Black
Headset cap, carbon material, weight 6 g, for 1 1/8" forks.
Wolf Tooth stem spacer 5 mm black
Spacer for a steerer tube, for 28.6 mm or tapered, black anodized, material AL 6061-T6, weight 3 g.
Wolf Tooth stem spacer 3 mm black
Spacer for stem, for 28.6 mm steerer or tapered, black anodized, material AL 6061-T6, weight 2 g.
Wolf Tooth Ultralight headset cap + 5 mm spacer espresso
Headset top cap and 5 mm spacer (2-in-1), for carbon fork steerer tubes, 6061-T6 aluminum, weight 12 g.
Cane Creek 110 fork crown race 41/30 1 1/8"
Aluminum lower crown race with a seal for the fork steerer. For the Cane Creek 110 headset.
Rie:sel Design Stem:cap headset cap dazzle
Headset cap, carbon material, weight 6 g, for 1 1/8" forks.
Rie:sel Design Stem:cap headset cap van life
Carbon headset cap, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset cap stickerbomb ultra black II
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset cap stickerbomb eyecatcher
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset cap maori
Headset top cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel Design tem:cap headset cap melon
Carbon headset cap, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:cap headset cap los muertos grey
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel Design Stem:Cap headset cap los muertos
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Rie:sel Design headset cap lemon
Carbon headset cap, weight 6 g, for 1 1/8 forks.