![Netherlands [EUR]](/images/front/locales/NLD.svg)
Headsets
Headsets fall into several categories (see below). There are external cup threadless headsets, which must be pressed into the frame. Another commonly used type is the zero-stack semi-integrated threadless headset, which also must be pressed into the frame, but unlike external cups, the cups sit flush with the headtube. Drop-in headsets have the bearing seats molded or machined directly into the frame where the cartridge bearings sit. The oldest and now uncommon type is the threaded headset.
Select Filters
Cane Creek Angleset ZS44/ZS56 headset
Revolutionary headset that allows you to change the fork steerer angle by 1°. Recommended for adjusting the geometry of DH bikes with a dual crown suspension…
Buy
Cane Creek Angleset ZS44/EC56 Kit headset
Revolutionary headset that allows adjusting the fork steerer angle by 0.5°, 1°, or 1.5°. Recommended for modifying the geometry of bikes with a single-crown…
Buy
Cane Creek AER stem spacer 1 1/8" 10mm
The Cane Creek AER 1 1/8" 10mm stem spacer is a lightweight spacer ring used to adjust the height of the stem on bicycles.
Buy
Cane Creek Forty IS42 Tall Top upper headset part 42 mm
Drop-In upper headset assembly for 42 mm diameter
Buy
Cane Creek Forty ZS55/40 (1.5") lower headset part
Lower part of headset, type ZS55, for head tube with an internal diameter of 55 mm, for a tapered steerer.
Buy
Mortop B52 bearing for headset
Bearing intended for headsets HI122, HI-125, HS120, WRC1.5
Buy
Cane Creek Forty EC44/40 bottom part of headset 1.5"
The Cane Creek Forty EC44 headset allows you to use a fork with a tapered steerer tube even in a frame with an internal head tube diameter of 44 mm.
Buy
Cane Creek Angleset ZS49/ZS49/30 headset
Revolutionary headset that allows changing the fork steerer tube angle by 1°. Recommended for adjusting the geometry of DH bikes with a dual-crown suspension…
Buy
Cane Creek Forty IS41 Short Top Drop In upper headset part
Upper part of the integrated Cane Creek headset for a 1 1/8 fork.
Buy
Cane Creek Forty IS52/40 1.5" Drop In bottom part of headset
Separate lower part of an integrated headset for frames with a 1.5" head tube and a 1.5" or "Tapered" fork steerer.
Buy
Cane Creek Angleset ZS44/EC49 headset
A revolutionary headset that allows you to change the fork steerer angle by 1°. We recommend it for adjusting bike geometry for "technical" (DH, FR, slopestyle…
Buy
Cane Creek Forty ZS44 Short Top headset upper part
Upper part of the Cane Creek 40 ZS44 headset with a low-profile aluminum cover.
Buy
Hope Hed Doctor headset expander
Expanding plug with a stopper in various colors of high-quality anodizing, suitable for both carbon and aluminum 1 1/8" steerers.
Buy
Cane Creek FORTY ZS49 1.5-1 1/8 headset
The Forty ZS49 headset reduces a 1.5" head tube (inner diameter of 49.61mm) for use with a fork with a 1 1/8" steerer. Suitable for downhill bikes and dual…
Buy
Cannondale F-Si 2019+ (K35029) headset for sizes M-XL
Original Cannondale headset, for F-SI models 2019+, for frame size M-XL, technical designation K35029.
Buy
Vision Top Cap Metron 5D ACR EVO top cap Matt Carbon
VISION stem cap for road bikes, compatible only with Metron 5D EVO, in a matte carbon finish.
Buy
BP star nut for headset 1-1/8" black
Headset compression ring for adjusting bearing preload and securing the stem, for a 1–1/8" fork steerer tube, black finish.
Buy
BlackBearing headset bearing 48x37x7 mm 45°
Headset bearing, chrome steel, 48x37x7 mm.
Buy
Rie:sel Stem:cap headset cap Cap Story
Headset cap, carbon material, weight 6 g, for 1 1/8 forks.
Buy
Cema headset bearing 41.8 x 30.5 x 8 mm 45°/45°
Headset bearing, outer diameter 41.8mm, inner diameter 30.5mm, height 8mm, angles 45°/45°.
Buy
Rie:sel Design Stem:cap headset cap Alpine
Carbon headset cap, weight 6 g, for 1 1/8 forks.
Buy
We have 468 products
Added to Cart
Continue Shopping
Via Facebook
Via Google
